Precision
cast aluminium enclosures suitable for housing a DIN rail,
circuit board
or mounting plate. Optional conductive gasket for RFI/EMC
protection. Accessories include: wall mounting kit, hinges,
mounting plate and security screws. Colour: Mid grey (RAL7001)
or unpainted in kit form. Size: 34 sizes from 50 x
45 x 30 to 600 x 230 x 110mm.
Profi Card
Cases
A one piece aluminium extrusion
with internal slots for 100 and 160mm Eurocards. Available
with a selection of aluminium front and end covers. Cover
with raised flange around the edge and inset panel suitable
for membrane keypad. Protection IP40 or IP65 with gasket kit. Colour: Extrusion: light grey
(RAL7035); Covers: mid grey (RAL7030). Size: Extrusion cross section:
165 x 105mm. Standard length 180mm.
Delta Boxes
Robust enclosures made from
a single aluminium extrusion with a slide-in recessed aluminium
top plate suitable for a membrane keypad. ABS end covers.
Supplied in standard lengths, with other lengths, painted
or unpainted, to special order. Sealed to IP43 or IP54 with
gaskets fitted. Colour: Black with texture finish. Black end covers. Size: Extrusion cross section:
80 x 40, 106 x 50, 166 x 35, 120 x 35, 166 x 50 and 106 x
70mm.
Tast Aluminium
Housings
Keyboard
style aluminium extrusion with slide-in annodized top plate.
Ideal for keyboards, data
entry, test sets and controllers. Suitable for desktop, machine
mounting or portable equipment. ABS end covers. Supplied
in
standard lengths with other lengths, painted or unpainted,
to special order. Colour: Extrusion, light grey
with texture finish (RAL7035); end cover, dark grey (RAL7012). Size: Extrusion cross section,
164 x 49/29 and 164 x 65/45mm.
Aluminium Panel
Mounting Cases to DIN 43700
A single
hollow aluminium extrusion with internal slots for circuit
boards. Supplied
with polyamide front bezel, unpunched polyamide rear cover
and two clip-on side clamps. Optional aluminium front panel
suitable for membrane keypad. Supplied in standard lengths
with other lengths to special order. Colour: Unpainted (natural). Size: Extrusion cross section:
72 x 72, 96 x 48 and 96 x 96mm.
Commando Cases
Made
from 2 aluminium extrusions with an ABS front bezel and
aluminium front plate suitable
for a membrane keypad. Wrap-round ABS rear cover. Internal
slots for 100mm Eurocards. Sealed to IP43 or IP54 with
gaskets
fitted. Supplied in standard lengths with other lengths,
painted or unpainted, to special order. Colour: Extrusion, silver
with texutre finish; end covers, black. Size: Extrusion cross section:
104 x 50, 104 x 104 and 104 x 158mm.
Multicard Cases
Constructed
from two basic aluminium extrusions which are combined
to give three different
case sizes. Wrap-round ABS end covers. Internal slots for
Eurocards. Supplied in standard lengths, with other lengths,
painted or unpainted, to special order. Protection IP43
or
IP65 with gaskets fitted. Colour: Extrusion, silver
with texture finish; end covers, black. Size: Extrusion cross section:
104 x 50, 104 x 104 and 104 x 158mm.
Mini Card Cases
Made
from a single hollow aluminium extrusion with internal
grooves for circuit boards.
Supplied with an unpunched polyamide rear cover. The front
polyamide cover takes an aluminium plate which is suitably
recessed for a membrane keypad. Supplied in standard lengths
with other lengths, painted or unpainted, to special order. Colour: Unpainted (natural). Size: Extrusion cross section:
72 x 72, 96 x 48 and 96 x 96mm.
Aluminium Profile
ETP
Made
from two aluminium extrusions with internal slots for Eurocards.
Recess for label or membrane keypad. Supplied in standard
lengths with other lengths, painted or unpainted, to special
order. Clip available for DIN rail (TS35) mounting. Optional
end plates for wall mounting. Colour: Black with textured
finish. Size: Extrusion cross section:
105 x 45, 105 x 66 and 105 x 87mm.
Extruded
Aluminium Box Sections
Silver
anodised aluminium extrusions with internal grooves for
circuit boards. Accessories: Wall / panel mounting brackets,
silicone rubber gasket kit to increase environmental
protection to IP65 or IP66. Colour: Silver. Size: Available
for 55,100 and 160mm wide boards. Length: 40,80,120,160 and
220mm with other lengths to special order.
Steel Enclosures
Sealed to IP66
Sheet
steel enclosures with screw down cover. Standard version
has plain sides without gland plate openings. Optional
gland plate opening (120mm deep version only), steel
internal mounting plate, DIN rail, hinges, stainless
steel
wall mounting kit and polycarbonate window in cover (120mm
deep version only). Finish: Zinc phosphate
surface treatment and polyester paint. Colour: Light Grey (RAL7032). Size: Available in two
depths 80 and 120mm.
Stainless
Steel Enclosures Sealed to IP66
Stainless
steet AISI 316 enclosures with screw down cover.
Plain sides, no gland plate openings. These enclosures
are available in two depths 80mm and 120mm. Optional
hinges, DIN rail, steel internal mounting plate and
stainless steel wall mounting
kit. Finish: Unpainted
brushed stainless steel. Colour: Natural. Size: 15
sizes from 150x150x80mm to 800x400x120mm.
Steel Enclosures
with Door to IP66
Steel
enclosures with door and 1 or 2 door latches depending
on size. Available with or without gland plate opening(s)
on the top, bottom and sides. Supplied with steel internal
mounting plate. Optional DIN rail, barrel lock with keys
for door latches and stainless steel wall mounting kit. Finish: Zinc phosphate
surface treatment and polyester paint. Colour: Light Grey (RAL7032). Size: 31 sizes from 200x300x150mm
to 1200x1000x307mm.
Stainless
Steel Enclosures with Door to IP66
Stainless
steel AISI 316 enclosures with 1 or 2 door latches
depending on size. Plain sides, no gland plate openings.
Supplied with galvanised steel internal mounting plate.
Door can be changed from right to left hand opening,
even on site. Optional DIN rail, barrel lock with keys
for door latches and stainless steel wall mounting
kit. Finish: Unpainted
brushed stainless steel. Colour: Natural. Size: 31
sizes from 200x300x150mm to 1200x1000x307mm.
